Multi-Constellation Configuration
A documented constellation combination supports configuration matching during system selection.
ResiNavAnti-Jamming TerminalsProduct image unavailableAnti-Jamming Terminals
RN2511-16A-SNB
16-Element Multi-Constellation GNSS Anti-Jamming Terminal
A GNSS anti-jamming terminal designed for receiver and platform integration. Its documented signal configuration is available for engineering evaluation.
Documentation: Public datasheet available
PRODUCT OVERVIEW
Terminal role and selection context.
This anti-jamming terminal provides the antenna-array reception and terminal functions needed between GNSS signals and the receiving navigation system. It is intended for engineering teams comparing terminal configurations for vehicles, marine equipment, industrial systems or custom navigation electronics. Selection should be based on the required signal configuration, receiver architecture, available installation space and the mechanical and electrical constraints of the target platform.
Multi-Frequency Configuration
The verified product record supports evaluation across more than one documented frequency band.
Channel Architecture
A verified channel configuration is available for receiver and system architecture review.
Array Configuration
A verified antenna-element configuration provides a clear basis for comparing models in the series.
ENGINEERING OVERVIEW
Documented configuration for integration review.
RN2511-16A-SNB is a 16-element, 16-channel GNSS anti-jamming terminal in the Anti-Jamming Terminals family. Its verified record lists GPS, Galileo and BeiDou, with GPS L1, Galileo E1 and BDS B1, for receiver and platform integration in the published application contexts. Evaluate it when the documented 16-element, 16-channel terminal architecture and multi-constellation configuration align with the intended system. Before selection, confirm the receiver, required signal configuration, installation space, power path, and cable or connector constraints; published interface and connector details are not specified. RN2512-AJS-16CH-DPA publishes the same element and channel counts in a different product type, so compare documented configurations rather than assume interchangeability. Final configuration remains subject to engineering review.
SELECTION GUIDANCE
Choose the specification for the required interferer count.
RN2511-16A-SNB publishes separate anti-jamming entries for one, seven and fifteen interferers. If your procurement brief specifies an interferer count, use the corresponding entry rather than the highest number in the specification. The published GPS L1, Galileo E1 and BDS B1 signal set remains a separate shortlist condition.
| Interferers stated in the record | Published anti-jamming figure |
|---|---|
| 1 interferer | ≥100 dBc |
| 7 interferers | ≥85 dBc |
| 15 interferers | ≥70 dBc |
For a seven-interferer requirement, the RN2511 documentation screen uses ≥85 dBc, not its ≥100 dBc single-interferer entry. For fifteen interferers, use ≥70 dBc. These are directly published entries, not capacities calculated from the model's sixteen elements or sixteen channels.
For another documented seven-interferer entry, compare RN-8AT-FULL-KGR-34V; its public sheet does not state a fifteen-interferer entry. RN2512-AJS-16CH-DPA publishes both counts, but is a different anti-jamming and anti-spoofing product version with BDS B1 and GPS L1 listed. Missing entries do not establish non-support, and a matching count does not make the products interchangeable.
Use this screen to select the model record and count-specific figure for your evaluation quotation. The public figures do not establish common test conditions or a receiver-level pass result, so they are not a cross-model performance ranking. You can enquire with the requirement already known; a complete engineering brief is not needed to start.
INTEGRATION & INSTALLATION
Confirm the installation context before selection.
Detailed mounting, interface and integration information is available during technical evaluation.
- Available installation space
- Mounting arrangement
- Receiver and system interface
- Power requirements
- Required constellations and bands
- Cable routing or connector constraints
- Environmental requirements
VERIFIED SPECIFICATIONS
Technical specifications.
All verified parameters are grouped in one continuous product datasheet for engineering review.
Signal & Anti-Jamming
- Supported constellations
- GPS; Galileo; BeiDou
- Frequency bands
- GPS L1; Galileo E1; BDS B1
- Element count
- 16
- Channel count
- 16
- Anti-jamming capability
- ≥100 dBc with 1 interferer; ≥85 dBc with 7; ≥70 dBc with 15
- Interference types
- Narrowband high-power interference; Wideband spectrum-matched interference; Pulse interference; Swept-frequency interference; Mixed interference
Coverage & Orientation
- Coverage and orientation
- Azimuth: 0–360°; elevation: −90–90°
Mechanical & Electrical
- Power consumption
- ≤25 W
- Dimensions
- 230 × 230 × 24 mm
- Weight
- ≤1250 g
RF Output
- RF output frequency
- 1561.098 MHz; 1575.42 MHz
- RF output power
- −70 to −60 dBm
- RF output impedance
- 50 Ω
APPLICATION SCENARIOS
Where this configuration may be evaluated.
These are application contexts, not customer installations or completed projects.
Vehicle Platform Integration
Navigation equipment integration within commercial vehicles and autonomous system architectures.
View application
Commercial Marine Navigation
Navigation equipment selection for commercial vessels, survey platforms and marine electronics.
View application
Industrial & Robotic Systems
Receiver and navigation integration within automation, robotic and industrial control equipment.
View application
Custom Navigation Equipment
Configuration review for purpose-built navigation electronics and platform-specific constraints.
View applicationREQUEST A QUOTE
Information to Include in Your RFQ.
Sharing these details helps engineering review the documented configuration against the intended integration.
- Intended application and platform
- Receiver architecture and interface requirements
- Required GNSS constellations or bands, including GPS L1, Galileo E1 and BDS B1 where applicable
- Available installation space, power path, and cable or connector constraints
- Environmental requirements for the target installation
- Prototype quantity or estimated production quantity